- Home
- Move Water
- Hydromatic
- Hydromatic Products
- Hydromatic Residential Products
- Hydromatic Effluent Pumps
- èßäÊÓƵ Hydromatic SKHD150 High-Head Cast Iron Effluent Pump
èßäÊÓƵ Hydromatic SKHD150 High-Head Cast Iron Effluent Pump
Main Content Starts Here
Discontinued
èßäÊÓƵ Hydromatic SKHD150 High-Head Cast Iron Effluent Pump
Generates high heads for bigger drain fields.
KEY FEATURES
- Two (2) Carbon/Ceramic Type 21 Mechanical Seals Mounted in Tandem
- Oil-Filled Motor with Automatic Reset Thermal Overload for Maximum Protection (single-phase models)
- Upper & Lower Ball Bearing Construction
- Piggyback Plug Available for Easy Maintenance and Switch Replacement
- Optional Seal Failure Probe Warns of Seal Leak
- Capacitor Start for Increased Starting Torque (single-phase models)
WARRANTY
12 months from date of purchase or 18 months from date of manufacture, whichever comes first.
Specifications
Item # | Horsepower |
---|---|
SKDH150 | 1-1/2 |
Item # | Horsepower |
---|---|
SKDH150 | 1-1/2 |
BODY CONSTRUCTION:Â Â Class 30 Cast Iron
HORSEPOWER:Â Â 1-1/2 HP
MAXIMUM HEAD:ÌýÌý127'
MAXIMUM CAPACITY:Â Â 55 GPM (3.5 LPS)
FLOW at 10' LIFT:Â Â 55 GPM (3.5 LPS)
SWITCH TYPE:Â Â standard is no switch. Optional wide-angle tethered Float Available for 1-Phase Models
MINIMUM SUMP DIAMETER:Â Â Simplex: 24" / Duplex: 36"
DISCHARGE PIPE SIZE:Â Â 1-1/2" NPT
MAXIMUM SOLIDS HANDLING SIZE:ÌýÌý3/4&±ç³Ü´Ç³Ù;
AMP DRAW (full load):Â Â 6.1 amps on 208v, 3phase / 12 amps on 230v, 1phase / 6 amps on 230v, 3phase / 2.5 amps on 460v / 2 amps on 575v
CORD LENGTH:Â Â 20' STW-A
VOLTAGE:Â Â 230v 1-phase OR 208v, 230v, 460v, or 560v 3-phase, 60 Hz
MAXIMUM LIQUID TEMPERATURE:  140°F (60°C)
IMPELLER CONSTRUCTION:Â Â Thermoplastic semi-open